Handset Forwarding - NEC DT900 Series User Manual

8 -100
U S I N G T H E M I C R O B R O W S E R
This page handles the following events:
Soft Key Features:
Back
OK
Hard Key Features:
4-way scroll BACK key
(Redial key)
4-way scroll FORWARD key
(Directory key)
4-way scroll UP key
(Volume UP Key)
4-way scroll DOWN key
(Volume DOWN Key)
ENTER key
H O T D E S K I N G S T A T U S U P D A T E S
Depending on the speed of your system and the processes that are running
Note:
and updating on your system, it may take up to 5 minutes before your name
and number are displayed on the phone after you log in to the phone. The
phone's main display will automatically refresh when it receives the name and
number information.
You will be able to make and receive calls immediately after a successful login,
even if the phone does not display your name and number yet.
You can log out using a star code, you can log in at another phone on the system, or
the system may automatically log you out after a configured period of time.
H A N D S E T F O R W A R D I N G
Conditional handset forwarding requirements set from the phoneset apply to
Note:
address-based users only. *72/*73 Handset Forwarding and Handset
Forwarding options from the phoneset are not supported for User Centric
enabled users. User Centric enabled users must use supported 3C system
client applications to set forwarding conditions.
The Handset Call Forwarding pages allow you to set, change and delete handset call
forwarding conditions for your phoneset, rather than using only 3C System Star
Codes or requiring 3C system client applications to access advanced call forwarding
settings.
Explanation
Return to the microbrowser Home page.
Exit the microbrowser to the appropriate call status
screen.
Explanation
Return to the microbrowser Home page.
No operation.
No operation.
No operation.
Exit the microbrowser to the appropriate call status screen
DT900/DT900S Series Phone User Guide