Monitor Presence Icons - NEC DT900 Series User Manual

7
Table 9.4
DT900/DT900S Series Phone User Guide
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
If you have assigned a Speed Dial to the entry, you can select the monitor settings for
this entry and press Enter
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key
when a Speed Dial is assigned to the entry, and a Presence icon is shown in the
Personal Directory and on the DESI-Less display of the phone.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key when a Speed Dial is assigned to the entry, and a Presence icon is
shown in the Personal Directory and on the DESI-Less display of the phone. When
a call is ringing on the monitored terminal, play a soft ring tone.
3
Option Visual and Soft Ring is only valid for SIP@Net platforms. Contact
Note:
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.

Monitor Presence Icons

Type
Line Key Registered
Unregistered
Speed Dial Key Not Available
(No Monitoring)
C A L L H I S T O R Y A N D D I R E C T O R I E S
b
on the cursor pad or the OK softkey.
Status Icon
The Personal Directory
9 -143