To Add A Speed Dial Key To An Existing Personal Directory Entry - NEC DT900 Series User Manual

8
9

To add a Speed Dial Key to an existing Personal Directory entry

1
2
3
7-82
S P E E D D I A L A N D P R O G R A M M A B L E K E Y S
Type
BLF Idle
Ringing (SIP@Net)
Ringing (3C system)
Subscription Failed
Online (3C system)
(Phone is Online)
On the Phone
(Phone is in use)
Held (3C system)
Busy
Phones do not publish presence information. Depending on other phones on
Note:
your system and any phone application software that you use, you may see
different LED behavior for different presence states.
You can also press the Cancel softkey to return to the previous screen.
Press the Save softkey to save your changes.
b
Press Enter on the cursor pad or the OK softkey to return to the Personal Directory,
or press the Exit key to return to the main phone screen.
Entries are uniquely defined by the combination of number and name. For the
purpose of uniquely defining an entry, the name is case insensitive.
Multiple entries with the same number and different names are allowed, and multiple
entries with the same name and different numbers are allowed. Multiple entries with
the same name and same number are not allowed. An error is displayed if you create
an entry with the same name and same number as an existing entry.
To change the name or number, select
trying to save the entry again.
If the Speed Dial number for a new Personal Directory entry is already used for
another entry, you will see an error when you try to save the Personal Directory entry.
3
Select Speed Dial to edit the Speed Dial number before trying to save the entry
again.
Press the Menu key.
1
Select Personal Directory.
Press the More softkey, and then the Edit softkey.
Status
LED is not lit
Blinking Red
Blinking Green
LED is not lit
Green
Red
Blinking Red
Red
1 2
Name or Number to edit the field before
DT900/DT900S Series Phone User Guide
Programmable
Key LED