Phone Keypad; The Dial Pad And/Or Buttons Are Not Working; I Want To Enter Specific Characters Or Letters In Speed Dials And Personal Directory Entries; Phone Softkeys - NEC DT900 Series User Manual

The dial pad and/or buttons are not working

1
2
3
I want to enter specific characters or letters in Speed Dials
and Personal Directory Entries
Table 11.1
The phone soft keys are not working
1
11-164
P H O N E K E Y PA D
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P H O N E K E Y P A D
Verify that the phone is receiving power.
Place a call to the telephone line from another working phone, and monitor your phone
for any changes to the display. If your phone is not responding at all, there may be a
problem with the phone hardware. Contact your system administrator.
Restart the phone:
Press the Menu key.
a.
5
Select Reboot.
b.
Press the OK softkey or
c.
If you cannot
Note: restart
and the network for ten seconds, then reconnect the telephone to your
network and power to perform a
By default, when you enter the Name section when entering information for a Speed
Dial or Personal Directory entry, the telephone keypad is in uppercase mode.
You can switch between upper and lower case character sets by pressing the
The phone displays the character entry mode it is currently using in the Icon Display
area.
Character entry mode Icon Displays
Feature
Keypad in first letter uppercase
entry mode
Keypad in all uppercase entry
mode
Keypad in all lowercase entry
mode
Keypad in numeric entry mode
For more information on the character sets, see "Speed Dial and Personal Directory
Character Sets".
P H O N E S O F T K E Y S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Verify that the phone is receiving power.
b
Enter key on the cursor pad to restart the phone.
the phone using the Menus, unplug the phone from power
.
restart
Icon
DT900/DT900S Series Phone User Guide
*
key.