Digiview Data Display Brightness; Detection; Signals Detected; Audio Alerts - Cobra ESD-9570 Operating Instructions Manual

3
O P E R AT I O N • S E T T I N G S

DigiView Data Display Brightness

Your detector has a Bright display mode
(for daytime driving) and 3 levels of Dim
display modes (Dim for dusk driving,
Dimmer for night driving and Dark where no
visual alerts will be displayed) to control the
display's brightness levels.
Dark indicator
Press and release the SELECT/DIM button
to switch between Bright mode or Dim
mode. In Bright mode you will hear 2
beeps. In Dim mode (Dim, Dimmer or Dark
mode) you will hear 1 beep.
SELECT/DIM button
18
Press and hold the SELECT/DIM button to
set the Dim mode default. The three Dim
display modes will cycle as long as the
SELECT/DIM button is held. When the
SELECT/DIM button is released, the Dim
mode currently displayed will be set. (See
page 7 for instructions on using the Program
mode to select a Dim mode default.)
Dim
Dark
Dimmer
The factory setting is Bright. The factory
Dim mode default setting is Dimmer.

Signals Detected

The tables on the following pages show you the types of signals your detector will detect,
as well as visual alerts it provides for each one.

Audio Alerts

A distinctly different alert tone is used for
each type of signal detected (including
separate tones for each laser signal). For X,
K and Ka band radar signals, the tones will
repeat faster as you approach the signal
source. The repeat rate of the tones gives
you useful information about the signal
detected. (See Responding to Alerts,
page 22.)
NW
Br ig ht
D E T E C T I O N

Visual Display

An indication of the type of signal detected
will appear in the DigiView Data Display.
During X, K and Ka alerts, you will also see
from 1 to 5 vertical bars, indicating the
strength of the signal detected.
SIGNAL STRENGTH CHART
Weakest
Signal
1
2
3
c
4
5
Strongest
Signal
s
19
4