Highway/City Modes - Cobra ESD-9570 Operating Instructions Manual

3
O P E R AT I O N • E A S Y S E T P R O G R A M M I N G
EasySet Programming Menu (continued)
MODE SETTING VISUAL
Auto Mute Mode AutoMute On
AutoMute Off
Set Compass Drive in 2 circles...
(see page 15 to calibrate compass)
Pop Ka Detect Mode
VG-2 Detect Mode
VG-2 Detect Audio Mode VG-2 Audio On
(not shown if VG-2 Detect is off)
VG-2 Audio Off
Spectre Detect Mode Spectre On
Spectre Off
Spectre Audio On
Spectre Detect Audio Mode
(not shown if Spectre Detect is off)
Spectre Audio Off
SmartPower Mode Smart Power On
Smart Power Off
Set Display Dim Mode Default*
Restore Factory Settings Are you sure?
Press SET to confirm...
Exit Program EXIT PROGRAM
Settings Saved!
* The settings for these user modes can also be changed with the one-button method. See the description of each user mode (following) for details.
8
RESULT
The audio volume of all alerts will be
automatically muted after 4 seconds for
as long as the signal is detected.
All alerts will sound at full volume for as
long as the signal is detected.
Allows you to calibrate the compass.
Pop On
The unit will detect Pop Ka signals.
Pop Off The unit will not detect Pop Ka signals.
VG-2 On The unit will detect VG-2 signals.
VG-2 Off The unit will not detect VG-2 signals.
With VG-2 Detect On, the unit
will give audible alerts for VG-2 signals.
With VG-2 Detect On, the unit
will give only visual alerts for VG-2 signals.
The unit will detect Spectre signals.
The unit will not detect Spectre signals.
With Spectre Detect On, the unit
will give audible alerts for Spectre signals.
With Spectre Detect On, the unit
will give only visual alerts for Spectre signals.
Turns SmartPower on.
Turns SmartPower off.
Dim Partially dimmed for dusk or night driving.
Dimmer More dimmed for dusk or night driving.
Dark Display is off.
Resets user modes and settings
to factory default.
Allows you to exit Program mode.
Highway/City Mode
Your detector has a Highway mode and
three different levels of City modes: City X,
City X Beep Off and City X+K. City X mode
sounds a single beep when the signal is first
detected. City X Beep Off mode prevents all
X band audio alerts until the signal strength
reaches level 3. City X+K mode combines
the City X mode with prevention of K band
audio alerts until the signal strength reads
level 1. This will reduce false alerts while
you are driving in or near urban areas where
there are many sources for conflicting X or K
band signals such as microwave towers and
automatic door openers.
Press and release the SET/CITY button to
switch between Highway mode or City
mode (City X, City X Beep Off or City X+K
mode). In Highway mode you will hear 2
beeps and "h" will appear in the display. In
City mode (City X, City X Beep Off or City
X+K mode) you will hear 1 beep and "c"
will appear in the display.
SET/CITY button
O P E R AT I O N • S E T T I N G S
N W c
City X, City X Beep Off, City X+K modes
N W h
Highway mode
Press and hold the SET/CITY button to set
the City mode default. The three City modes
will cycle as long as the SET/CITY button is
held. When the SET/CITY button is
released, the City mode currently displayed
will be set. (See page 7 for instructions on
using the Program mode to select a City
mode default.)
City X
City
City X
X+K
Beep Off
The factory setting is Highway. The factory
City mode default setting is City X.
3
9