Cancel The Programme; Programme End; Removing Laundry/Switching Off The Appliance - Siemens iQ300 WD14S4 Series Manual

Cancel the programme

For programmes washing at high
temperatures:
Swich off the appliance by touching
1.
power On/Off button.
Swich on the appliance by touching
2.
power On/Off button
To cool down laundry: select
3.
Rinse à.
Touch the A Start/Reload button.
4.
For programmes washing at low
temperatures:
Swich off the appliance by touching
1.
power On/Off button.
Swich on the appliance by touching
2.
power On/Off button
Select 0 [ Spin/Drain.
3.
Touch the A Start/Reload button.
4.
For programmes in drying process:
Do not interrupt Dry program.
1.
If absolutely necessary: touch On/Off
2.
button wait until laundry cool down.
Open Door carefully. Hot air will
escape.

Programme end

End lights up on the display and ~ and
Õ displays are off.
If you have selected 2, the water is only
drained after rinse process, no spin
cycle.
Operating the appliance
Removing laundry/switching
off the appliance
Open the door and remove the
1.
laundry.
Turn off the water tap.
2.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
en
41