Starting The Programme; Childproof Lock; Adding/Removing Laundry; Changing The Programme - Siemens WN44A2X0GC Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Operating the appliance
en

Starting the programme

Touch and hold Start/Pause button for
1~2 seconds, then release the button.
The programme starts and the
appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.

Childproof lock

You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the Ready in/Time Dry and
varioSpeed ( buttons for 3 seconds.
The symbol w lights up in the display
panel.
w lights up: The childproof lock is
activated.
w flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
When the programme ends, End
Note:
is displayed. The door is unlocked. w
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the Ready in/Time Dry
and varioSpeed ( buttons until the
symbol w disappears.

Adding/removing laundry

After starting the programme (only for
washing), you can add or remove
laundry if necessary.
40
Touch the Start/Pause button. The
appliance checks whether reloading is
possible.
If the following appears on the display
panel:
The symbol Õ disappears,
reloading is possible.
The symbol Õ lights up, reloading is
not possible.
To continue the programme, touch the
Start/Pause button. The programme
continues automatically.
Notes
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.

Changing the programme

If you have started the wrong
programme by mistake, you can
change the programme as follows:
Touch the Start/Pause button.
1.
Select another programme.
2.
And touch the Start/Pause button
3.
again. The new programme starts
from the beginning.
If drying is activated, after
Note:
touching the Start/Pause button, when
the Hot is displayed, waiting for the
appliance running to cool down the
laundry till the Hot disappears, then
select another programme.

Cancel the programme

For programmes washing at high
temperatures:
Touch the Start/Pause button.
1.
To cool down laundry: Select Rinse.
2.
Touch the Start/Pause button.
3.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wn44a2xsgc

Table of Contents