G Speedperfect; Operating The Appliance; Preparing The Appliance - Siemens iQ300 WD14S4 Series Manual

G speedPerfect

Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch G speedPerfect to activate or
deactivate this additional programme
setting.
With the G speedPerfect
Note:
additional programme setting activated,
the maximum load of washing will be
reduced, and extra water will be needed
for the washing process.

Operating the appliance

1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean k programme.
~ "Before washing for the first time"
on page 21
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
en
37