Epson WF-2960 Series User Manual page 232

Product Information
Coordination Modes
*4
Wireless Securities
*1 IEEE802.11n is only available for the HT20.
*2 Not supported for IEEE 802.11b.
*3 Simple AP mode is compatible with a Wi-Fi connection (infrastructure) or an Ethernet connection.
*4 Wi-Fi Direct supports WPA2-PSK (AES) only.
*5 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards
Communication Mode
Connector
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2 The connected device should comply with IEEE802.3az standards.
Network Functions and IPv4/IPv6
Functions
Network Printing EpsonNet Print (Windows)
Standard TCP/IP (Windows)
WSD Printing (Windows)
Bonjour Printing (Mac OS)
IPP Printing (Windows, Mac
OS)
PictBridge Printing (Wi-Fi)
Epson Connect (Email Print,
Remote Print)
AirPrint (iOS, Mac OS)
> >
Product Specifications
Infrastructure, Wi-Fi Direct (Simple AP)
WEP (64/128bit), WPA2-PSK (AES)
IPv4
IPv4, IPv6
IPv4, IPv6
IPv4, IPv6
IPv4, IPv6
IPv4
IPv4
IPv4, IPv6
Network Specifications
*2*3
*5
, WPA3-SAE (AES)
*1
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet)
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps
Full duplex, 100Mbps Half duplex
RJ-45
Supported
✓
✓
✓
✓
✓
-
✓
✓
232
*2
Remarks
-
-
Windows Vista or
later
-
-
Digital camera
-
iOS 5 or later, OS X
Mavericks (10.9.5)
*
or later