Epson WF-2960 Series User Manual page 220

Product Information
Header:
Enter your sender name and fax number. These appear as a header on outgoing faxes.
Your Phone Number:
You can enter up to 20 characters using 0-9 + or space.
Fax Header:
You can register up to 21 sender names as necessary. You can enter up to 40 characters for each
sender name.
Receive Mode:
Select the receive mode. For details, see the related Information below.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. The distinctive ring service, offered by many telephone
companies (the service name differs by company), allows you to have several phone numbers on one
phone line. Each number is assigned different ring pattern. You can use one number for voice calls
and another for fax calls. Depending on the region, this option may be On or Off.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive:
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code:
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax:
Select options to reject receiving junk faxes.
Rejection Number List:
Fax Header Blank:
Unregistered Contacts:
> >
Settings Menu List
If the other party's phone number is in the rejection number list, set whether to reject
the incoming faxes.
If the other party's phone number is blocked, set whether to reject receiving the faxes.
If the other party's phone number is not in the contacts, set whether to reject receiving
the faxes.
General Settings
220