Mounting - Omron V720 Series Operation Manual

Mounting

4-3 Mounting
Enclosed Mounting
DIN Track Mounting
DIN track
End plate
PFP-100N2 DIN Track
The Controller can be mounted to DIN tracks or enclosed-mounted to panels
with screws.
Be sure to secure the Controller with M4 screws together with spring
washers and flat washers. Do not use an organic screw adhesive on the
screws to fix them in place, as this may cause the Controller case to crack.
TTwo, M4
Closed mounting
V720-CD1D
Mounting hook
DIN track (1m long)
OMRON PFP-100N2 is
recommended.
Height: 80 mm max.
V720-CD1D
Take the height of the DIN track into
Note
consideration at the time of mounting.
PFP-M End Plate
(See note)
(1) Hook the Controller to part A. Then press
the Controller in direction B to mount the
Controller
(2) Pull the mounting hook downwards, then lift
the Controller upwards to disconnect the
Controller.
Section 4-3
4-9