Configuring Pc 1 And Pc 2 - Linksys RVS4000 User Manual

4-Port Gigabit Security Router with VPN
Configuring VPN Router 2
For VPN Router 2, follow the same instructions in the previous section, "Configuring VPN Router 1."

Configuring PC 1 and PC 2

1. Set PC 1 and PC 2 to be DHCP clients (refer to Windows Help for more information).
2. Verify that PC 1 and PC 2 can ping each other (refer to Windows Help for more information).
If the computers can ping each other, then you know the VPN tunnel is configured correctly. You can select
different algorithms for the encryption, authentication, and other key management settings for VPN Routers 1 and
2. Refer to the previous section, "Configuring the Key Management Settings," for details.
Congratulations! You have successfully configured a VPN tunnel between two VPN Routers.
Appendix D: Configuring a Gateway-to-Gateway IPSec Tunnel
Configuring PC 1 and PC 2
76