Linksys RVS4000 User Manual page 40

4-Port Gigabit Security Router with VPN
unique an Inbound SPI and Outbound SPI. No two tunnels share the same SPI. Notice that Inbound SPI must
match the other router's Outbound SPI, and vice versa.
Status
Status. This field shows the connection status for the selected tunnel. The state is either connected or
disconnected.
Connect button. Use this to establish a connection for the current VPN tunnel. If you have made any changes,
click Save Settings to first apply your changes.
Disconnect button. Use this to break a connection for the current VPN tunnel.
View Log button. Click this to view the VPN log, which shows details of each tunnel established.
Advanced Settings button. If the Key Exchange Method is Auto (IKE), this button provides access to some
additional settings relating to IKE. Use this if this router is unable to establish a VPN tunnel to the remote VPN
Gateway; ensure the Advanced Settings match those on the remote VPN Gateway.
Advanced Settings
Phase 1
Operation Mode. Select the method to match the remote VPN endpoint.
• Main: Main Mode is slower but more secure.
• Aggressive: Aggressive mode is faster but less secure.
Local Identity. Select the desired option to match the "Remote Identity" setting at the other end of this
tunnel.
• Local IP address: Your WAN IP Address.
• Name: Your domain name.
Remote Identity. Select the desired option to match the "Local Identity" setting at the other end of this
tunnel.
• Local IP address: WAN IP Address of the remote VPN endpoint.
• Name: Domain name of the remote VPN endpoint.
Chapter 6: Setting Up and Configuring the Router
VPN Tab
31