Connection Instructions; Figure 5-2: Connect A Pc; Figure 5-3: Connect The Internet; Figure 5-4: Connect The Power - Linksys RVS4000 User Manual

4-Port Gigabit Security Router with VPN

Connection Instructions

1. Before you begin, make sure that all of your hardware is powered off, including the Router, PCs, hubs,
switches, and cable or DSL modem.
2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router.
Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, hub, or switch.
Repeat this step to connect more PCs or other network devices to the Router.
3. Connect your cable or DSL modem's Ethernet cable to the Router's Internet port.
4. Power on the cable or DSL modem and the other network device if using one.
5. Connect the included AC power cable to the Router's Power port on the side of the Router, and then plug the
power adapter into an electrical outlet.
The Power LED on the front panel will light up as soon as the power adapter is connected properly.
Proceed to "Chapter 6: Setting Up and Configuring the Router."
Chapter 5: Connecting the Router
Connection Instructions

Figure 5-2: Connect a PC

Figure 5-3: Connect the Internet

Figure 5-4: Connect the Power

12