Vpn Tab; Figure 6-22: Port Range Triggering; Figure 6-23: Vpn - Linksys RVS4000 User Manual

4-Port Gigabit Security Router with VPN
End. This is the end of the port range. Enter the end of the range of port numbers (external ports) used by the
server or Internet application. Check with the software documentation of the Internet application for more
information if necessary.
Protocol. Select the protocol(s) used for this application, TCP and/or UDP.
IP Address. For each application, enter the IP address of the PC running the specific application.
Enabled. Click the Enabled checkbox to enable port range forwarding for the relevant application.
Port Range Triggering
Application Name. Enter the name of the application you wish to configure.
Triggered Range. For each application, list the triggered port number range. These are the ports used by
outgoing traffic. Check with the Internet application documentation for the port number(s) needed. In the first

Figure 6-22: Port Range Triggering

field, enter the starting port number of the Triggered Range. In the second field, enter the ending port number of
the Triggered Range.
Forwarded Range. For each application, list the forwarded port number range. These are the ports used by
incoming traffic. Check with the Internet application documentation for the port number(s) needed. In the first
field, enter the starting port number of the Forwarded Range. In the second field, enter the ending port number of
the Forwarded Range.
Enabled. Click the Enabled checkbox to enable port range triggering for the relevant application.

VPN Tab

IPSec VPN
Select Tunnel Entry. Select a tunnel to configure.
Delete Button. Click this button to delete all settings for the selected tunnel.
Summary Button. Clicking this button shows the settings and status of all enabled tunnels.
IPSec VPN Tunnel. Check the Enable option to enable this tunnel.

Figure 6-23: VPN

Tunnel Name. Enter a name for this tunnel, such as "Anaheim Office".
Chapter 6: Setting Up and Configuring the Router 28
VPN Tab