Figure 6-29: Log; Figure 6-30: Diagnostics - Linksys RVS4000 User Manual

4-Port Gigabit Security Router with VPN
Email Address for Alert Logs. Enter the e-mail address the Log is to be sent to.
Return Email Address. The e-mail will show this address as the Sender's address.
Enable Syslog. Enable the checkbox if you want to this feature.
Syslog Server. Enter the IP Address in the Syslog Server field when Enable Syslog is checked.
Local Log. Enable this if you want to see a log of all incoming and outgoing URLs or IP addresses.
View Log button. When you wish to view the logs, click View Log. A new window will appear with the log data.
Diagnostics
Ping Test Parameters

Figure 6-29: Log

Ping Target IP. Enter the IP address or URL that you want to ping.
Ping Size. Enter the size of the packet you want to use.
Number of Pings. Enter the number of times you wish to ping the target device.
Ping Interval. Enter the time period (Milliseconds) between each ping.
Ping Timeout. Enter the desired time period (Milliseconds). If a response is not received within the defined ping
period, the ping is considered to have failed.
Start Test. Click this button to begin the test. A new screen will appear and display the test results. A summary of
the results will be shown on this screen.
Ping Result. It displays the Ping status.
Backup & Restore
Backup & Restore. Use this to download a copy of the current configuration, and store the file on your PC. Click
Backup button to start the download.

Figure 6-30: Diagnostics

Restore configuration. This allows you to restore a previously saved config file back to the Router. Click the
Browse button to select the config file, then click Restore button to upload the config file.
Chapter 6: Setting Up and Configuring the Router 36
Administration Tab