Table of Contents
Advertisement
10/100 16-Port VPN Router
VPN Tab - VPN Pass Through
The VPN Passthrough screen allows you to enable or disable passthrough for a variety of VPN methods.
IPSec Pass Through
Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP
layer. IPSec Pass Through is enabled by default to allow IPSec tunnels to pass through the Router.
PPTP Pass Through
Figure 6-91: VPN Pass Through
Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP
network. PPTP Pass Through is enabled by default.
L2TP Pass Through
Layer 2 Tunneling Protocol is the method used to enable Point-to-Point sessions via the Internet on the Layer 2
level. L2TP Pass Through is enabled by default.
Click the Save Settings button to save your changes, or click the Cancel Changes button to undo the changes.
Chapter 6: Setting up and Configuring the Router
68
VPN Tab - VPN Pass Through
Advertisement
Table of Contents
