Installation; Connecting To Network - Edimax GS-5008E Manual

II. Installation
Read the following topics and perform the procedures in the correct order.
Incorrect installation may cause damage to the product.
II-1

Connecting to Network

1. There are two ways to physically set up the switch.
˙ Place the switch on a flat surface.
˙ Wall-mount the switch. The product is designed with wall-mounted
holes. (The wall-mounted mounting screws and accessories are not
included.)
2. Connect the power adapter to the switch and the power outlet.
(Note: Make sure that the "PWR" LED is green.)
3. Plug the standard Cat5e Ethernet cable into the LAN port and connect it to
the computer and prepare for web-based configuration. (Note: Make sure
that the "LAN" LED is green or amber.)
4. Connect any networking device to the switch via Ethernet cable. (Note:
Make sure that the "LAN" LED is green or amber.)
5. Connect the router to the switch via Ethernet cable. (Note: Make sure that
the "LAN" LED is green or amber.) The hardware installation is complete!
1
Wall-Mount
1
２
Power On
３
Computer
４
Network Device
5
Router
3