II
Installation
Read the following topics and perform the procedures in the correct order.
Incorrect installation may cause damage to the product.
II-1.
Physically Setup
There are two ways to physically set up the switch. No matter how you
installed the switch, please keep it with good ventilation.
1. Desktop Placement: Attach
the supplied rubber feet to
the recessed areas on the
bottom of the switch. Place
the switch on a flat surface
and keep it with good
ventilation.
2. Rack-mount the switch: You can mount the switch in any standard size,
19-inch (about 48 cm) wide rack with 1 Rack Unit (1U) of space, which is
1.75 inches (4.45 cm)
high. A pair of extension
brackets and screws are
needed to adapt the
switch to the rack size.
Secure the switch on the equipment rack.
3