Iii-4 Vlan - Edimax GS-5008E Manual

III-4 VLAN
This page allows user to configure each port of selected VLANs.
Item
Apply
Port
PVID
Create New VLAN
VLAN ID
Non-Member
Tag Egress Member
Untag Egress Member
Modify
Delete
NOTE: The PVID of a port is the VLAN id that will be assigned to any
untagged frames entering the switch on that port (assuming the switch is
using port-based VLAN classification). Each port can set a PVID ONLY.
Description
Click "Apply" to save the values.
Designated port number.
Enter a Port VLAN ID for each port.
Click "Create New VLAN" to enter new
VLAN settings.
Virtual LAN ID.
Port is not a member of a VLAN.
Tag outgoing packets of a port which is a
member of the VLAN.
Untag outgoing packets of a port which is
a member of the VLAN.
Modify port settings of a specific VLAN.
Delete a specific VLAN.
10