If the printer does not read the memory card, remove and reinsert it.
Note: The printer reads only one media device at a time. If you insert more than one memory card, you will be asked
to select which one you wish to use and remove the other one.
Related topics:
•
"Connecting photo storage devices" on page 0
Viewing photos
Replacing screen saver photos on the control panel display
You can select up to four photos to use as screen savers on the printer.
1
Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 7 or "Inserting
a flash drive" on page 7.
2
Press
or
repeatedly until Tools appears on the display.
3
Press
.
4
Press
or
repeatedly until Customize is selected.
5
Press
.
6
Press
or
to select After 30 Sec or After 1 Min.
7
Press
to select Replace Screen Saver Photos.
8
Press
.
9
Follow the instructions on the display.
Related topics:
•
"Viewing photos" on page 0
Viewing a photo slideshow on the control panel display
If you want to see a slideshow of the photos on a memory card or flash drive, see "Using the Slideshow menu" on
page 30.
Related topics:
•
"Viewing photos" on page 0
Editing photos
You can use the following paper types with your printer:
•
Lexmark Perfectfinish Photo Paper
•
Lexmark Photo Paper
•
Photo/glossy paper
Notes:
•
For best results, use Lexmark Perfectfinish Photo Paper or Lexmark Photo Paper.
•
Do not use Lexmark Premium Photo Paper. Your print cartridge is not compatible with this type of paper.
Using the printer
9