High-Low Beam Control; Cruise Control - GMC Hummer H3 2008 Owner's Handbook Manual

High-Low Beam Control

When the headlights are turned on
and the lever is in the centre posi-
tion, the headlights are set to low
beams.
Push the lever toward the front of
the vehicle to turn on the high
beams.
Pull the lever back to the centre
position to return to low beams.
You may be able to flash your high
beams to signal other drivers.
To do this, pull the multi-function
lever toward you.
Then release the lever.
When the high beams are on, an
indicator light on the instrument
cluster will also be on.
Section 1

Cruise Control

CAUTION
Don't leave your cruise control
switch on when you're not
using it.
CAUTION
It is dangerous to use cruise
control in heavy traffic, or on
slippery or winding roads.
103 . . .