Serial Menu - Lexmark C530 series, C532 series, C534 series Menus And Messages Manual

Serial menu

Menu item
PCL SmartSwitch
PS SmartSwitch
NPA Mode
Serial Buffer
Description
Sets the printer to automatically switch to PCL emulation when
a print job received through a serial port requires it, regardless
of the default printer language
Notes:
•
On is the default setting.
•
When the Off setting is used, the printer does not examine
incoming data.
•
When the Off setting is used, the printer uses PostScript
emulation if PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if PS
SmartSwitch is set to Off.
Sets the printer to automatically switch to PS emulation when a
print job received through a serial port requires it, regardless of
the default printer language
Notes:
•
On is the default setting.
•
When the Off setting is used, the printer does not examine
incoming data.
•
When the Off setting is used, the printer uses PCL
emulation if PCL SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if PCL
SmartSwitch is set to Off.
Sets the printer to perform the special processing required for
bidirectional communication following the conventions defined
by the NPA protocol
Notes:
•
Auto is the default setting.
•
Changing this setting automatically resets the printer.
Sets the size of the serial input buffer
Notes:
•
Auto is the default setting.
•
The Disabled value turns off job buffering. Any jobs already
buffered on the disk are printed before normal processing
is resumed.
•
The serial buffer size setting can be changed in 1K
increments.
•
The maximum size allowed depends on the amount of
memory in the printer, the size of the other link buffers, and
whether Resource Save is set to On or Off.
•
To increase the maximum size range for the Serial Buffer,
disable or reduce the size of the parallel, serial, and network
buffers.
•
Changing this setting automatically resets the printer.
39
Settings
On
Off
On
Off
On
Off
Auto
Disabled
Auto
3K to maximum size
allowed