56 Serial port <x> disabled
•
Press
until
Continue appears, and then press
The printer discards any data received through the serial port.
•
Make sure the Serial Buffer menu item is not set to Disabled.
56 Standard USB port disabled
•
Press
until
Continue appears, and then press
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.
58 Too many flash options installed
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
61 Remove defective hard disk
•
Press
until
Continue appears, and then press
•
Install a different hard disk before performing any operations that require a hard disk.
62 Disk full
•
Press
until
Continue appears, and then press
•
Delete fonts, macros, and other data stored on the hard disk.
•
Install a larger hard disk.
63 Unformatted disk
•
Press
until
Continue appears, and then press
•
Format the disk.
If the error message remains, the hard disk may be defective and require replacing.
80 Fuser life warning
•
Press
until
Continue appears, and then press
•
Format the disk.
80 Replace fuser
Replace the fuser using the instruction sheet that shipped with the replacement part.
82 Waste toner box nearly full
•
Press
until
Continue appears, and then press
•
Order a replacement waste toner box immediately.
82 Replace waste toner box
Replace the waste toner box using the instruction sheet that shipped with the replacement part.
to clear the message.
to clear the message.
to clear the message and continue printing.
to clear the message and continue processing.
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
51