Remove Paper From Standard Output Bin; Resetting Fuser Count; Resetting The Printer; Restore Held Jobs - Lexmark C530 series, C532 series, C534 series Menus And Messages Manual

Remove all color supplies
The printer is set for Color Lock Out printing in the Config menu. Try one of the following methods:
•
Remove all color toner cartridges and photoconductor units.
Note: Do not remove the black toner cartridge.
•
Press until Continue appears, and then press

Remove paper from standard output bin

Remove the paper from the standard output (exit) bin of the printer. Wait for the message to clear.

Resetting Fuser Count

The fuser count is being reset. Wait for the message to clear.

Resetting the printer

The printer is resetting to the current default settings. Any active print jobs are canceled. Wait for the message to clear.

Restore Held Jobs?

•
Press until Continue appears, then press
•
Press until Do not restore appears, then press

Restoring Factory Defaults

Wait for the message to clear.
When factory default settings are restored:
•
All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
•
All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom
settings in the Parallel, Serial, Network, Infrared, LocalTalk, USB, and Fax menus.
Restoring Held Job(s) x/y
•
Wait for the message to clear.
•
Press until Quit restoring appears, then press
Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored.
Serial <x>
The printer is using a serial cable connection. The serial port is the active communication link.
Setup Required
1
Remove all packing materials from the printer.
2
Make sure the fuser, transfer belt, trays, and all supplies are installed correctly.
3
Press until Show Areas appears, and then press
A tutorial appears on the display indicating the actions you need to take to complete setup.
Some held jobs were lost
•
Press until Continue appears, then press
•
Cancel the current job.
to clear the message and print in Color Lock Out mode.
to restore all held jobs stored on the printer hard disk.
to delete all held jobs stored on the printer hard disk.
to delete unrestored held jobs.
.
to clear the message and resume printing.
47