Lexmark C520 Reference Manual page 48

Message
39 Page is too complex to print
50 PPDS font error
51 Defective flash detected
52 Not enough free space in flash
memory for resources
53 Unformatted flash detected
54 Serial option <x> error
54 Network <x> software error
54 Standard network software error
55 Unsupported option in slot <x>
56 Parallel port <x> disabled
56 Standard parallel port disabled
56 Serial port <x> disabled
Understanding printer messages
Action
• Press until
the message and continue printing.
The job may not print correctly.
• Cancel the current job.
• Install additional printer memory.
• Press until
the message and continue printing.
The job may not print correctly.
• Cancel the current job.
Press until
message and continue printing.
Install different flash memory before downloading any resources to
flash.
• Press until
the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory
are deleted.
• Delete fonts, macros, and other data stored on the flash memory.
• Install a larger capacity flash memory card.
Press until
message and continue printing.
Format the flash memory before storing any resources on it. If the
error message remains, the flash memory may be defective and
require replacing.
• Make sure the serial link is set up correctly, and the appropriate cable
is in use.
• Make sure the serial interface parameters (protocol, baud, parity, and
data bits) are set correctly on the printer and host computer.
• Press until
the message and continue printing.
The job may not print correctly.
• Turn the printer off and then on to reset the printer.
• Press until
the message and continue printing.
The job may not print correctly.
• Program new firmware for the network interface.
• Reset the printer.
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the unsupported option.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer on.
• Press until
the message.
The printer discards any data received through the parallel port.
• Make sure the Parallel Buffer menu item is not set to Disabled.
• Press until
the message.
The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item is not set to Disabled.
Understanding printer messages
48
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
to clear
to clear
to clear the
to clear
to clear the
to clear
to clear
to clear
to clear