Lexmark C520 Reference Manual page 18

Menu item Purpose
Print Recovery Specifies whether the printer
continues from certain offline
situations, reprints jammed pages,
or waits until the entire page is
processed and ready to be printed.
Printer Language Specifies the default printer
language used to communicate data
from the computer to the printer.
Note: Setting a printer language as
the default does not prevent a
software application from sending
print jobs that use the other
language.
Print Area Modifies the logical and physical
printable area.
Download Target Specifies the storage location for
downloaded resources.
Storing downloaded resources in
flash memory or on a hard disk is
permanent storage rather than the
temporary storage that RAM
provides. The resources remain in
the flash memory or on the hard
disk even when the printer is turned
off.
Using printer menus
Values
Auto Continue:
*Disabled
5–255
Jam Recovery:
On
Off
*Auto
Page Protect:
*Off
On
PCL Emulation
*PS Emulation
*Normal
Whole Page
*RAM
Flash
Disk
Menu Groups
18
Lets the printer automatically continue
from certain offline situations when not
resolved within the specified time
period.
5–255—Specifies the amount of time
in seconds that the printer waits.
Specifies whether the printer reprints
jammed pages.
On—Printer reprints jammed pages.
Off—Printer does not reprint jammed
pages.
Auto—Printer reprints a jammed page
unless the memory required to hold
the page is needed for other printer
tasks.
Successfully prints a page that may
otherwise generate Complex Page
errors.
Off—Prints a partial page of data if
memory is insufficient to process the
entire page.
On—Ensures that an entire page is
processed before it prints.
Note: If, after selecting On, the page
still cannot print, reduce the size and
number of fonts on the page, or
increase the installed printer memory.
Note: For most print jobs, On is not
needed. When On is selected, printing
may be slower.
PCL emulation—Uses a PCL
interpreter for incoming host
communications.
PostScript emulation—Uses a PS
interpreter for incoming host
communications.
Note: The Whole Page setting only
affects pages printed using PCL 5
interpreter. This setting has no effect
on pages printed using the PCL XL or
PostScript interpreters. If attempting to
print any data in the non-printable area
defined by Normal Print Area, the
printer clips the image at the boundary
defined by the Normal defined
printable area.
All downloaded resources are
automatically stored in printer memory
(RAM).
All downloaded resources are
automatically stored in flash memory.
All downloaded resources are
automatically stored on the hard disk.