Lexmark C520 Reference Manual page 44

Message
Disk corrupted
Disk Recovery x/5 yyy%
DO NOT POWER OFF
Enabling Menus
Encrypting Disk yyy%
DO NOT POWER OFF
Enter PIN
Enter PIN to lock
Flushing buffer
Formatting Disk yyy%
DO NOT POWER OFF
Formatting Flash
DO NOT POWER OFF
Insert Tray <x>
Internal System Error
Reload Bookmarks
Internal System Error, Reload
Security Certificates
Invalid Network Code
Invalid Engine Code
Invalid PIN
Load Manual feeder with
<Custom Type Name>
Load Manual feeder with
<Custom String>
Load Manual feeder with <size>
Load Manual feeder with
<size> <type>
Understanding printer messages
Action
The printer has attempted a disk recovery process, and cannot repair
the disk.
Reformat appears. Press
files currently stored on the disk.
Warning: Do not turn the printer off while this message is displayed.
The printer is attempting to recover the hard disk. Disk recovery takes
place in five phases; the operator panel displays the percent complete of
the current phase.
Wait for the message to clear.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
The printer is encrypting the hard disk. The percent complete is
displayed.
Wait for the message to clear.
Enter the PIN specified in the driver when the confidential job was sent
to the printer.
Enter the correct PIN number to lock the operator panel and prevent
menu changes.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
The printer is formatting the hard disk. The percent complete is
displayed.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Insert the specified tray.
• Reload the Bookmarks.
• Press until
the message and continue printing.
• Reload the Security Certificates.
• Press until
the message and continue printing.
Download valid code to the MarkNet N8000 Series internal print server.
Note: Network code may be downloaded while this message is
displayed.
Download valid engine code to the printer.
Note: Engine code may be downloaded while this message is displayed.
Enter the correct PIN.
• Load the specified media in the manual feed slot or multipurpose
feeder.
• Press until
the manual feed request and print on media already installed in one of
the sources.
If the printer finds a tray that has media of the correct type and size, it
feeds media from that tray. If the printer cannot find a tray with the
correct media type and size, it prints on whatever media is installed in
the default source.
• Cancel the current job.
Understanding printer messages
44
to reformat the disk and delete all
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
to clear
to clear
to ignore