Lexmark C520 Reference Manual page 47

Message
Waiting
1565 Emul Error Load Emul Option
31 Missing or defective <color>
cartridge
32 Replace unsupported <color>
cartridge
34 Incorrect media
34 Short Paper
35 Insufficient memory to support
Resource Save feature
37 Insufficient memory to collate
job
37 Insufficient memory for Flash
Memory Defragment operation
37 Insufficient memory, some held
jobs were deleted
37 Insufficient memory, some held
jobs were lost
38 Memory Full
Understanding printer messages
Action
The printer has received a page of data to print, but is waiting for an End
of Job command, a Form Feed command, or additional data.
• Press to print the contents of the buffer.
• Cancel the current job.
The printer automatically clears the message in 30 seconds, and then
disables the download emulator on the firmware card.
Download the correct download emulator version from the Lexmark Web
site.
Remove the specified toner cartridge, and then place it in the correct
position.
Remove the toner cartridge, and install a supported one.
• Load the appropriate media in the selected source.
• Press until
the message and print the job using a different paper source.
• Press until
the message and continue printing.
The printer does not automatically reprint the page that prompted the
message.
• Check tray length and width guides to ensure media is properly fitted.
• Make sure the print job is requesting the correct size of media.
• Adjust the Paper Size setting for the size media being used.
If MP Feeder Size is set to Universal, make sure the media is large
enough for the formatted data.
• Cancel the current job.
• Press until
Resource Save and continue printing.
• To enable Resource Save after receiving this message:
– Make sure the link buffers are set to Auto, then exit the menus to
activate the link buffer changes.
– When Ready is displayed, enable Resource Save.
• Install additional memory.
• Press until
the portion of the job already stored and begin collating the rest of the
job.
• Cancel the current job.
• Press until
the defragment operation and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
The printer deleted some held jobs in order to process current jobs.
Press until
message.
The printer was unable to restore some or all of the confidential or held
jobs on the hard disk.
Press until
message.
• Press until
the message and continue printing.
The job may not print correctly.
• Cancel the current job.
• Install additional printer memory.
Understanding printer messages
47
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
to clear
to clear
to disable
to print
to stop
to clear the
to clear the
to clear