Lexmark C520 Reference Manual page 46

Message
Remove all color supplies
Remove paper from standard output
bin
Resetting Fuser Count
Resetting the Printer
Restore Held Jobs?
Restoring Factory Defaults
Restoring Held Job(s) x/y
Serial <x>
Setup Required
Some held jobs were lost
Standard Bin Full
Submitting selection
Tray <x> Empty
Tray <x> Low
Tray <x> Missing
USB
USB <x>
View supplies
Understanding printer messages
Action
The printer is set to Black Only mode in the CONFIG MENU in the Print
Mode menu item.
• Remove all color toner cartridges and color photoconductor units.
• Press until
the message and print in Black Only mode.
• Cancel the current job.
• See the User's Guide for more information.
Remove the media from the standard bin.
Wait for the message to clear.
Wait for the message to clear.
• Press until
all Print and Hold jobs on the hard disk.
• Press until
to delete Print and Hold jobs.
Wait for the message to clear.
Note: When factory default settings are restored:
• All downloaded resources (fonts, macros, symbol sets) in the printer
memory are deleted.
• All menu settings return to the factory default setting except:
– The Display Language setting in the "Setup" Menu.
– All settings in the "Parallel" Menu, "Serial" Menu, "Network" Menu,
"Infrared" Menu, "LocalTalk" Menu, "USB" Menu, and "Fax" Menu.
• Wait for the message to clear.
• Press until
delete unrestored Print and Hold jobs.
Note: x represents the number of the job being restored, and y
represents the total number of jobs to be restored.
A serial interface is the active communication link.
Remove the packing material from the printer. Make sure all supplies,
the fuser, the transfer belt, and the trays are installed correctly.
• Press until
the message and continue printing.
The printer frees memory by deleting the oldest held job and
continues deleting held jobs until there is enough printer memory to
process the job.
• Cancel the current job.
Remove the stack of media from the bin to clear the message.
Wait for the message to clear.
Load media in the tray to clear the message.
Add media to the tray to clear the message.
Insert the tray.
The printer is processing data through the specified USB port.
Displays the current level of all printer supplies.
Understanding printer messages
46
Continue appears, and then press
Continue appears, and then press
Do not restore appears, and then press
Quit restoring appears, and then press
Continue appears, and then press
to clear
to restore
to
to clear