Lexmark C520 Reference Manual page 45

Message
Load <src> with <Custom Type Name>
Load <src> with <Custom String>
Load <src> with <size>
Load <src> with <type> <size>
Menus are Disabled
Network
Network <x>
No held jobs
No jobs found
No jobs to cancel
Parallel
Parallel <x>
Power Saver
Printer locked, enter PIN to unlock
Printing
Programming Disk
DO NOT POWER OFF
Programming Flash
DO NOT POWER OFF
Programming System Code
DO NOT POWER OFF
Ready
Remote Management Active
DO NOT POWER OFF
Understanding printer messages
Action
• Load the source with the correct type and size media.
• Cancel the current job.
The printer menus are disabled. The printer settings cannot be changed
from the operator panel.
Note: It is possible to cancel a job, print a confidential job, or print a held
job.
Contact your system support person.
A network interface is the active communication link.
Wait for the message to clear.
Note: The four-digit personal identification number (PIN) entered is not
associated with any confidential print job.
• Press until
another PIN.
• Press until
Enter PIN screen.
Wait for the message to clear.
A parallel interface is the active communication link.
• Send a job to print.
• Press to warm the printer to normal operating temperature and
display the Ready message.
The operator panel is locked.
Enter the correct PIN number to unlock it.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear and the printer to reset.
Send a job to print.
The printer settings are being configured, and the printer was taken
offline to ensure it is not currently printing and processing jobs.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Understanding printer messages
45
Try again appears, and then press
Cancel appears, and then press
to enter
to exit the