Setting Defaults - Lexmark X85 Getting Started

Setting defaults

If you are usually copying and scanning using a particular setting, like a
certain size paper, you may want to set this as your default. If you are using
your printer with a computer, you must make changes using both the
operator panel and the Scan & Copy Control Program.
Using the operator panel:
Make sure:
• Paper Size is set to desired paper
size
• Copy Source Size is set to desired
copy size
1 Press .
Menu
2 Press or
Copy Source Size
display, and then press
3 Press or
setting appears on the display, and
then press
Select
4 Press .
Menu
or
5 Press
appears on the display, and then
press .
Select
until or
Language
appears on the
.
Select
until the desired
.
until Set Defaults
Using the computer:
Make sure:
• Paper Size is set to desired paper
size in your printer settings
• The area to be scanned is set to the
desired paper size in the Scan &
Copy Control Program
1 From your program File menu, select
Print.
2 To customize print settings, click
Properties or Printer Preferences.
3 Select the Paper tab and select the
paper size you want, and then click
OK.
4 Click Start
Lexmark 85
Program.
5 Click File
the Page tab.
6 Select the paper size you want, and
then click OK.
14
Programs
Scan & Copy Control
Setup, and then select