Xerox VersaLink C71 Series User Manual page 188

Paper and Media
6. Adjust the length and width guides to fit the labels.
7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is set to Labels.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to
Settings.
9. To confirm the settings, touch O O K K .
10. To return to the Home screen, press the H H o o m m e e button.
Loading Labels in Trays 3 and 4
1. Pull out Tray 3 or Tray 4 until it stops. Wait for the tray to lower and stop.
Note: Ensure that labels are the correct size for the tray. Do not load custom-size paper into Trays 3 or 4. To
change the paper size in Trays 3 and 4, refer to
188
Configuring Trays 3 and 4 of the Tandem Tray
Xerox ® VersaLink ® C71XX Series Color Multifunction Printer User Guide
Configuring Tray
Module.