Removing And Installing Engine Cover Panels; Removing And Installing Air Filter Element - Audi A8 2010 Workshop Manual

Audi A8 2010 ➤
Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011
2.4 Removing and installing engine cover
panels
Removing
– Lift off engine cover panel (front) -1- or engine cover panel
(rear) -2-.
Installing
– To avoid damage, do not strike the engine cover panel with
your fist or with any kind of tool.
– Position engine cover panel on engine and press it into re‐
taining clips with both hands.
2.5 Removing and installing air filter ele‐
ment
Special tools and workshop equipment required
♦ Silicone-free lubricant
Removing
– Remove lock carrier cover -2- ⇒ Rep. gr. 63 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
18
Rep. gr.24 - Mixture preparation - injection