Key, Check Functionality; Dtc Memory, Checking; Engine Compartment Front Noise Insulation Cover, Removing And Installing - Audi TT 2007 Repair Manual

Audi TT 2007 ➤
Maintenance Procedures - Edition 08.2011
2.14

Key, Check Functionality

– Separate keys so that the function of each key can be checked
individually.
– Insert each key into the ignition and start the engine.
– If engine switches off by itself after about 3 seconds and "save"
appears in the odometer display, the key has not been pro‐
grammed to the immobilizer.
– Repair measure: Guided Fault Finding (Programming vehicle
keys).
– Note in the delivery check list the number of keys checked and
given to the owner.
2.15

DTC Memory, Checking

– Follow these steps in sequential order.
♦ Connect VAS 5051/5052
♦ Vehicle Self-Diagnosis (OBD)
♦ Gateway device list
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
♦ Read the control module with the fault stored in the DTC mem‐
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
ory.
♦ Correct relevant malfunctions with customer's approval.
2.16 Engine Compartment Front Noise Insu‐
lation Cover, Removing and Installing
– Remove noise insulation -mounting pieces 1 through 4-.
28
Rep. Gr.03 - Maintenance, Diagnosis