Table of Contents
Advertisement
Other
In the "Other" tab, you can configure general reader settings, e.g. relating to acoustic signals
or power-saving functions.
Figure 5-23
Table 5- 22
Settings
Sound
Scan
Locate
Module
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
"Settings > Other" menu
Settings of the "Other" menu
Description
Slider to enable/disable the scan sound
If the function has been enabled, a signal sound is generated for each
transponder identified during a scan operation.
Slider to enable/disable the localization sound
If the function has been enabled, the distance to the transponder is reproduced
by signal sounds when transponders are located. The nearer you get to the
transponder, the higher the frequency of the signal sound becomes.
"SIMATIC Mobile Reader" app
5.4 Functions of the UHF app variant (RF660M)
73
Advertisement
Table of Contents
