Siemens SIMATIC Ident RF360M Operating Instructions Manual page 25

Procedure: Attaching the retaining strap
Follow these steps to attach the retaining strap to the mobile reader:
1. Turn or lay the reader on its front.
2. Push or pull the retaining strap upwards from the bottom through the upper retaining strap
hook.
Figure 4-10
3. Connect the retaining strap loop to the bottom of the reader.
Figure 4-11
4. Close the Velcro fastener of the retaining strap.
Figure 4-12
To ensure a secure hold, the retaining strap should be tight enough that you can easily
slide your hand between the retaining strap and the reader and hold the reader with
minimal slack.
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
Pushing/pulling the retaining strap through
Attaching the retaining strap loop
Closing the Velcro fastener
Commissioning
4.1 Commissioning (hardware)
25