Table of Contents
Advertisement
Commissioning
4.1 Commissioning (hardware)
Interfaces
The charging/docking station has three interfaces, as well as two charging interfaces for the
mobile reader and spare batteries.
Figure 4-1
① USB interface
② Ethernet interface
③ Power supply interface
4.1.2
Replacing/inserting the battery
The reader's battery is inserted in the factory as standard. A description of how to replace the
battery or insert a new battery is provided below. The battery compartment is located on the
back of the reader.
Procedure
Follow these steps to replace the battery of the mobile reader:
1. Remove the retaining strap, if necessary, by unhooking it at the bottom of the remove or
remove the pistol handle as described in section "Attaching/replacing the reader handle
(Page 26)".
2. Turn or lay the reader on its front.
3. Open the battery compartment by pressing the latch (metal clip) lengthways towards the
head module (top of reader) ①.
18
Interfaces of the charging/docking station
(type A)
(RJ45; 10/100 Mb)
(DC socket; hollow plug)
④ Charging interface for the mobile reader
⑤ Charging interface for spare batteries
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
Advertisement
Table of Contents
