Table of Contents
Advertisement
"SIMATIC Mobile Reader" app
5.4 Functions of the UHF app variant (RF660M)
Logbook
In the "Logbook" tab, you can enable/disable the logbook function and export and reset the
logbook.
Figure 5-21
Table 5- 21
Functions
Activate
Logbook created
on
Entries in the
logbook
70
"Settings > Logbook" menu
Functions of the "Logbook" menu
Description
Slider for enabling/disabling the logbook
If this function has been enabled, all results of the scan operation are entered in
the logbook.
Note that the logbook is created as ring buffer (for up to 8,000 individual
transponders).
Note: This function corresponds to the "Logging activated" parameter in the
"Scan" menu.
Display of when the logbook was created. The date and time of the first scan
performed that was entered in the current logbook or because of which the
logbook was created are specified as start time.
Number of entries that were saved in the logbook.
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
Advertisement
Table of Contents
