Siemens SIMATIC Ident RF360M Operating Instructions Manual page 45

Tag
In the "Tag" tab, you can specify or restrict which transponder protocols/types are detected by
the mobile reader. Restriction of the transponder types to be read increases the reading
speed and may simplify work because only the desired transponder types are detected and
displayed.
Figure 5-7
Table 5- 8
Settings
RF300
MIFARE Classic
ISO15693
ECC
Semaphore
Configure reader
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
"Settings > Tag" menu
Settings of the "Tag" menu
Description
Drop-down list to select whether transponders of the "RF300" transponder
protocol should be read.
Drop-down list to select whether transponders of the "MIFARE Classic"
transponder protocol should be read.
Drop-down list to select the transponder types to be read within the "ISO15693"
transponder protocol. You can select all transponder types, one transponder type
or none.
Check box for enabling/disabling the ECC method
This function can only be enabled for the "RF300" and "MIFARE Classic"
transponder protocols and is aimed at trained users. You can find detailed
information on this method in the product information "Input parameters for the
RF300 system".
Check box for enabling/disabling the semaphore method
This function can only be enabled for the "RF300" and "MIFARE Classic"
transponder protocols and is aimed at trained users. You can find detailed
information on this method in the product information "Input parameters for the
RF300 system".
Button to activate the settings
"SIMATIC Mobile Reader" app
5.2 Functions of the HF app variant (RF360M)
45