Advertisement
Logging Into the 831-t5
Logging Into the 831-t5
A browser-based graphical user interface (GUI) is used to manually configure the 831-t5. The following steps describe how to connect and login
to the device:
1. Ensure your computer is connected to the 831-t5 either via Wi-Fi or Ethernet connection to the LAN port.
2. Configure your computer's network interface to acquire an IP address automatically using DHCP.
3. Open a web browser and enter the following: http://router or http://setup. A sign-in page should appear. If you are unable to connect to
the 831-t5 using either of these shortcuts, you can also enter the IP address of the unit. The default IP address is 192.168.0.1.
4. Enter the default username and password. The default username is admin and the default password is admin.
g
NOTE
If you have forgotten the password for this device, select Forgot password? and follow the instructions to reset the device to the factory
defaults. Next, follow the instructions under
5. Select Sign In. The Dashboard page appears, showing data about the system.
Product Specifications
Electrical
■ Power is provided by a 12V DC power adapter that is included with the 831-t5. The power adapter operates from a power source of 100 to
240V AC, 50 - 60 Hz. The nominal output is 12V DC ±5% with a minimum current rating of 3.0 Amps. For US and Canadian applications, a
UL Listed limited power source (LPS) is supplied and required for use. For deployment outside of North America, an LPS specifically
approved for that country, such as a CE Mark, is supplied and required for use.
g
NOTE
It is strongly suggested that the power supply (a 5-foot (1.5 m) power cord) included with the 831-t5 be connected to a surge suppressor
device which can have its own extension cable. The surge protection device should provide L-N, L-G, and N-G protection. It is also
recommended that the device contains a visual 'GOOD' indicator.
Environment
■ Operating Temperature: 32°F to 104°F (0°C to 40°C)
■ Storage Temperature: -40°F to 158°F (-40°C to 70°C)
■ Relative Humidity: 10 to 95 percent, non-condensing
g
NOTE
Changes or modifications not expressly approved by Adtran will void the warranty.
Compliance
This product meets the following compliance requirements:
■ UL /cUL Listed
■ FCC Part 15, Class B
■ ICES-003 (Class B)
■ IEC 62368-1
■ EN 62368-1, AS/NZS 62368.1
■ RoHS Compliant
4
on page 3.
"Quick Setup for the 831-t5"
831-t5 Mesh AP QSG
6SDG831T5-13A
Advertisement
