Table of Contents
Advertisement
Adtran
Logging Into the SDG-8610
Using SmartOS
A browser-based user interface (GUI) is used to manually configure the SDG-8610. The following steps describe how to
connect and login to the device:
1. Ensure your computer is connected to the SDG-8610 either via Wi-Fi or Ethernet connection to the LAN port.
2. Configure your computer's network interface to acquire an IP address automatically using DHCP.
3. Open a web browser and enter the following: http://router or http://setup. A sign-in page should appear. If you are
unable to connect to the SDG-8610 using either of these shortcuts, you can also enter the IP address of the unit. The
default IP address is 192.168.1.1.
4. The default username is admin. The password is the account password that was specified during the quick setup.
NOTE
If you have forgotten the password for this device, select Forgot password? and follow the
instructions to reset the gateway configuration to the factory defaults. Next, follow the
instructions under
5. Select Sign In. The Dashboard page appears, showing data about the system.
Product Specifications
Electrical
Power is provided by a 12V DC power adapter that is included with the SDG-8610. The power adapter operates from a
power source of 100 to 240V AC, 50 - 60 Hz. The nominal output is 12V DC ±5 % with a minimum current rating of 1.5 Amps.
For US and Canadian applications, a UL Listed limited power source (LPS) is supplied and required for use. For
deployment outside of North America, an LPS specifically approved for that country, such as a CE Mark, is supplied and
required for use.
NOTE
It is strongly suggested that the power supply (a 5 ft. (1.5 m) power cord) included with the SDG-
8610 be connected to a surge suppressor device which can have its own extension cable. The
surge protection device should provide L-N, L-G, and N-G protection. It is also recommended that
the device contains a visual 'GOOD' indicator.
Environment
Operating Temperature: 41° F to 104° F (5° C to 40° C)
l
Storage Temperature: -13° F to 158° F (-25° C to 70° C)
l
Relative Humidity: 5 to 85 percent, non-condensing
l
NOTE
Changes or modifications not expressly approved by Adtran will void the warranty.
Compliance
This product meets the following compliance requirements:
UL /cUL Listed
l
FCC Part 15, Class B
l
ICES-003 (Class B)
l
6SDG8610-13A
Using
SmartOS.
Using SmartOS
5
Advertisement
Table of Contents
