Table of Contents
Advertisement
& W W ARNING
ARNING Risk of injury from using the
windshield wipers while the engine hood is
open
When the engine hood is open and the wind-
shield wipers are set in motion, you can be
trapped by the wiper linkage.
Always switch o the windshield wipers
#
and ignition before opening the engine
hood.
%
If the wiper blades are worn out, they will not
wipe the windshield properly. Replace the
wiper blades twice a year, preferably in spring
and fall.
Fold wiper arm
3
away from the windshield.
#
Hold wiper arm
3
and turn the wiper blade
#
away from wiper arm
3
arrow as far as it will go.
Slide catch
2
upwards in the direction of the
#
arrow until it engages.
Remove wiper blade
1
#
the direction of arrow 4.
Carefully remove hose
5
#
blade.
Attach hose
5
to the new wiper blade.
#
Insert new washer blade
#
wiper arm 3.
When doing so, take into account the di erent
lengths of the wiper blades:
Driver's side: long wiper blade
R
front-passenger side: short wiper blade
R
Slide catch
2
downwards until it engages.
#
Fold back the wiper blade onto the wiper arm.
#
#
R R eplacing t
#
#
#
#
#
#
in the direction of the
Mirrors
Mirr
Operating t
Oper
from the wiper arm in
from the wiper
1
in the holder on
Light and vision
Fold wiper arm
3
back onto the windshield.
eplacing the r
he rear windo
ear window wiper blade
w wiper blade
Fold wiper arm
3
away from the rear window.
Press both retaining clips
direction of the arrow and swivel the wiper
blade away from the wiper arm.
Pull wiper blade
1
upwards out of the holder
on wiper arm 3.
Insert new wiper blade
1
wiper arm 3.
Push new wiper blade
1
until the retaining clips engage.
Fold wiper arm
3
back onto the rear window.
ors
ating the outside mirr
he outside mirrors
ors
& W W ARNING
ARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
If you adjust the driver's seat, the head
R
restraint, the steering wheel or the mirror
while the vehicle is in motion
If you fasten your seat belt while the vehi-
R
cle is in motion
Before starting the engine: In particular,
#
adjust the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.
95 95
2
together in the
in the holder on
onto wiper arm
3
Advertisement
Table of Contents
