Table of Contents
Advertisement
Displa
Display messag
y messages es
Intr
Introduction
oduction
F F unction of displa
unction of display messag
y messages es
The display messages appear on the multifunction
display.
The display messages with graphic displays can be
displayed in simpli ed format in the Operator's
Manual and may deviate from the display on the
multifunction display. The multifunction display
shows high-priority display messages in red. In
addition, a warning tone sounds for speci c display
messages.
Act in accordance with the display messages and
comply with the additional instructions in this
Operator's Manual.
In addition, symbols are shown for some display
messages:
¤ Further information
O Hide display messages
You can use the le -hand Touch Control to select
between the symbols by swiping to the le or right.
Pressing ¤ displays further information on the
multifunction display. Pressing O hides the dis-
play message.
You can hide low-priority display messages by
pressing the ¤ button or with the le -hand
Touch Control. The display messages are saved in
the message memory.
Rectify the cause of a display message as quickly
as possible.
You cannot hide high-priority display messages.
The multifunction display will show these display
messages until their causes have been recti ed.
Calling up sav
Calling up saved displa
ed display messag
y messages es
On-board computer:
Service
1 Message
4
5
If there are no display messages,
appears on the multifunction display.
Browse through the display messages by swip-
#
ing upwards or downwards on the le -hand
Touch Control.
T T o e
o exit t
xit the messag
he message memory
e memory: : press the %
#
button.
Display messages and warning and indicator lamps 283
No Messages
283
Advertisement
Table of Contents
