Sockets - Mercedes-Benz Freightliner Sprinter 2022 Operating Instructions Manual

Table of Contents

Advertisement

Seats and stowage
80 80
%
Depending on the vehicle equipment, the vehi-
cle has additional 12 V sockets:
In the lower control panel in the front cen-
R
ter console
In the driver's seat
R
In the cargo compartment
R
Using the 115 V socke
Using t
he 115 V socket in t
t in the low
he lower contr
& D D AN
ANGER
GER Risk of fatal injury due to dam-
aged connecting cables or sockets
If a suitable device is connected, the 115 V
socket will be carrying a high voltage. If the
connecting cable or the 115 V socket is pulled
out of the trim or is damaged or wet, you could
receive an electric shock.
Only use dry and damage-free connect-
#
ing cables.
When the ignition is switched o , ensure
#
that the 115 V socket is dry.
If the 115 V socket is damaged or gets
#
pulled out of the paneling, immediately
have the socket checked or replaced at a
quali ed specialized workshop.
Never plug the connecting cable into a
#
115 V socket that is damaged or has
been pulled out of the trim.
& D D AN
ANGER
GER Risk of fatal injury due to incor-
rect handling of the socket
You could receive an electric shock:
if you reach into the socket.
R
if you insert unsuitable devices or objects
R
into the socket.
Do not reach into the socket.
#
Only connect suitable devices to the
#
socket.
R R eq equir uirements:
ements:
The devices must be equipped with a suitable
R
plug which conforms to the standards speci c
to the country you are in.
Only devices up to a maximum of 150 watts
R
are permitted.
Do not use multiple socket outlets.
R
er control panel
ol panel
Open ap 3.
#
Insert the plug of the device into 115 V socket
#
1.
When the on-board electrical system voltage is
su cient, indicator lamp
If you will not be using the 115 V power socket,
keep the ap closed.
Charging a mobile phone using t
Char
ging a mobile phone using the USB socke
t t he r
he rear
ear
Place the mobile phone in stowage compart-
#
ment
charge.
2
lights up.
he USB socket in
1
and connect it to USB port
t in
2
to

Advertisement

Table of Contents
loading

Table of Contents