Maintenance
5
Section 12 / 16
Dust
Fine sharp lines in slow scan
direction on the flat field (see
beside).
•
Check if scanner is dusty. In
case of, use the scan-brush to
remove it. Expose another flat
field and compare it again with
the sample.
If there are still unacceptable
effects please contact the Support
Center.
Completion of Maintenance
(1) Confirm the maintenance by signing the checklist
(2) Make a backup of the system on floppy.
(3) Inform the customer about what was done during the maintenance and
which repairs need to be done in next future.
(Type 5155 / 100/200)
ADC Solo
DD+DIS013.02E
Figure 14
Edition 1, Revision 10