Maintenance; Preventive Maintenance Schedule - AGFA DR 100e User Manual

Maintenance

In order to assure a continuous and safe performance of the equipment, a
periodic maintenance program must be established. It is the owner's
responsibility to supply or arrange for this service.
There are two levels of maintenance, the first consists of tasks which are
performed by the user/operator, and the second are those tasks to be
performed by qualified X-ray service personnel.
The manufacturer is responsible for safety features of its own products, only
provided that maintenance, repairs and modifications are performed
exclusively by the manufacturer's personnel or by personnel expressly
authorized by the manufacturer.
The manufacturer can't be considered responsible for any error, damage or
injury caused by improper use or lack of maintenance of the equipment.
Always consult the Agfa Service documentation and an AGFA trained and
authorized Service engineer for complete maintenance schedules.

Preventive maintenance schedule

The user must ensure that all checks are performed satisfactorily before using
the equipment for its intended purpose.
Table 1: Preventive maintenance by the user
Interval What to do?
Daily Check for defective lights, components, nameplates and damaged
warning signals, main cables and connectors.
Daily Check all cable and connectors for damage or breaking.
Warning: Improper, irregular or lack of maintenance of the
equipment can lead to injuries to persons (e.g. by radiation
hazard) and property damage as a result of malfunctions
and defects of the equipment.
Warning: Wear of equipment due to excessively long
intervals between service may lead to personal injury and
property damage due to worn and unsafe parts.
Warning: Incorrect or defective spare parts may adversely
affect the safety of the system and lead to damages,
malfunctions or total failure. Use only original spare parts
provided by the manufacturer.
DR 100e (Film/CR) | Introduction | 45
0360B EN 20181015 0853