Care And Maintenance; Specifications - La Crosse Technology WS-8248U-CH Instruction Manual

CARE AND MAINTENANCE:

•
Avoid placing the units in areas prone to vibration and shock as these may cause damage.
•
Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct
sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes which
reduces the accuracy of readings.
•
When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or
scouring agents.
•
Do not submerge the units into water.
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace only
with new batteries of the recommended size.
•
Do not make any repairs to the units. Please return it to the original point of purchase.
Opening and tampering with the units may invalidate the warranty.

SPECIFICATIONS:

Temperature measuring range
Indoor: +14.1ºF to +99.8ºF with 0.2ºF resolution
-9.9ºC to +37.6ºC with 0.1ºC resolution
("OFL" displayed if outside this range)
Outdoor : -21.8ºF to +157.8ºF with 0.2ºF resolution
-29.9ºC to +69.9ºC with 0.1ºC resolution
("OFL" displayed if outside this range)
Temperature checking interval
Indoor: every 10 seconds
Outdoor: every 5 minutes
Humidity measuring range
Indoor: 1-99%
Transmission distance: maximum 330 feet (100 meters) in open field
Power source (Alkaline batteries recommended)
Atomic clock : 3 x AA, 1.5V batteries
Transmitter: 2 x AA, 1.5V batteries
Battery life: about 12 months
Dimensions (H x W x D)
Atomic clock: 11.75" x 12" x 1.25" / 299 x 305 x 32 mm
16