Telnet/Ssh - D-Link DIR-X1530 User Manual
Ax1500 wi-fi 6 gigabit router
Hide thumbs
Also See for DIR-X1530:
- Quick installation manual (49 pages) ,
- Quick start manual (2 pages) ,
- Quick installation manual (46 pages)
Table of Contents
Advertisement
DIR-X1530 AX1500 Wi-Fi 6 Gigabit Router
User Manual
Telnet/SSH
On the System / Telnet/SSH page, you can enable or disable access to the device settings via
TELNET and/or SSH from your LAN. By default, access is disabled.
To enable access via TELNET and/or SSH, move the Enable Telnet switch and/or Enable SSH
switch to the right. In the Port field, enter the number of the router's port through which access will
be allowed (by default, the port 23 is specified for Telnet and the port 22 is specified for SSH).
Then click the APPLY button.
To disable access via TELNET and/or SSH again, move the Enable Telnet switch and/or Enable
SSH switch to the left and click the APPLY button.
Figure 175. The System / Telnet/SSH page.
Page 238 of 254
Configuring via Web-based Interface
Advertisement
Table of Contents
